Description
The VB270 input option offers monitoring and analysis of QPSK/8PSK signals found in DVB-S and DVB-S2 satellite transponders. The chassis can be equipped with a single VB120 or VB220 IP-PROBE controller card and up to two VB270 QPSK input cards under its control.
The complete configuration with the fully licensed VB120 provides realtime monitoring and alarming for two QPSK/8PSK RF inputs, 10 IP MPTS/SPTS multicasts and one ASI TS input. ETSI TR 101 290 analysis is performed in parallel for QPSK/8PSK inputs, the ASI input and the IP input. If the VB220 is used as master card the IP monitoring capacity is increased to impressive 180 MPTS/SPTS multicasts.
The combined unit is ideal for hybrid networks where IP is used as a carrier from head-end to the satellite uplink station. The built-in round-robin functionality allows sequential analysis of multiple QPSK/8PSK multiplexes, making it possible to monitor a complete transponder using a single VB270.
- DiSEqC 2x compliant
- DVB-S: 10-30 Msymb
- DVB-S2: (LDPC/BHC) 10-30 Msymb
- RF measurements: pre and post FEC BER, SNR
- RF input - F connector
- Analog RF carrier signal level measurement
- Configurable round robin transponder testing
- Fully controlled via backplane by VB120 or VB220
- Built-in general purpose alarm relay (GPI)
- 2 x ASI output for ad-hoc ASI connections - 75 ohm BNC
- IP Networks
- Hybrid Networks
- Remote Monitoring
- Field testing and Analysis
RF INPUT
F-connector, 75 ohm female
ASI OUTPUTS
F-connector, 75 ohm female
ALARM RELAY
9-pin D-SUB, male
3-pin relay
MECHANICAL
Standard 19” 1RU rack-mount
W x H x D: 19 x 1.7 x 15.75 in. (483x43x400 mm)
Weight: 9.3lbs. (4.2 kg) fully populated
ENVIRONMENT SPECIFICATIONS
Operating temperature: 0°C to 50°C
Storage temperature: -20°C to 70°C
Operating humidity: 5% to 95% non-condensing
CONTROL AND MANAGEMENT
Fully controlled through backplane
Accessible through master VB120 or VB220 user interface
POWER SUPPLY REQUIREMENTS
Draws power from backplane (+5V)
Maximum 5W dissipated per card