8VSB/ASI to ASI/Composite Receiver Decoder Card - CLOSE OUT!

    AG-4803

  • $410.00

  • ← Previous Product Next Product →

Description

Sencore’s AG 4803 is a receiver decoder card with multiple channel, high-density, multi-format decoding capabilities. The 8VSB/ASI to ASI/Composite receiver decoder card enables providers to receive ATSC broadcast signals and output those signals via ASI and Composite Video.

This series of receiver decoder cards are used within the openGear™ chassis. With the open architecture of the openGear™ system, the multi-format decoding functionality of Sencore’s award winning Modular Receiver Decoder (MRD) can be easily integrated with a wide range of solutions available from multiple companies each specializing in their own technologies.

  • Multi-Format SD/HD MPEG2 & H.264 Decoder Future proof off-air turn around applications with multi-format support on one card
  • Composite Video Output Output Composite Video with the re-created NTSC VANC data (closed captions, XDS [from 608 data or from PSIP tables] and AMOL/Gemstar [SCTE127])
  • Manual or AFD Triggered Down-conversion Fix the output format to the preferred center-cut, letterbox, or anamorphic modes. Or, switch formats on the fly with support for the Active Format Descriptor (AFD)
  • ASI Input Automatic redundancy switching from 8VSB to ASI from off-air to fiber fed back-up
  • ASI Output Simultaneous ASI output to facilitate transport stream analysis or as an input directly to a stat-mux
  • Remote Access View multiple chassis and multiple cards simultaneously with the DashBoard™ application. Integrate monitoring and control into any network management system with the available SNMP MIB
  • Easily transition to all digital ATSC broadcasts while supporting the needs for extended analog signal carriage
  • Receive ATSC broadcasts and demodulate to ASI for feeding a stat-mux while monitoring programs via NTSC

INPUT SPECIFICATIONS
Connector: F-81 Type, panel mount, female
Impedance: 75 ohms

RF SPECIFICATIONS
Frequency Range: 50-850MHz, VHF/UHF (Ch2 – Ch69)
Sensitivity: –25dBmV
Dynamic Range: >40dB
Modulation: 8VSB (ATSC A/53E, A/74)
MER: Range: 0 – 30dB
Low limit flag: User defined
Input Level Flag: Range: –20dBmV to +20dBmV
Accuracy: +/-5dB
Low flag limit: User defined

ASI INPUT
Number of ASI Inputs: 1
Standard: EN50083-9 (V2:3/98) DVB-ASI
Data Bit Rate: 270 Mbps
Max TS Rate Supported: 160 Mbps
Mode: Byte & Burst
Packet Size: 188 Byte & 204 Byte

DECODER SPECIFICATIONS
Max TS Rate Supported: 160 Mbps

VIDEO PROCESSING
Number of supported services: 1
Supported Codecs:
MPEG2 ISO/IEC 13818-2
MPEG4 ISO/IEC 14496-10
Chroma/Profile/Level:
MPEG2 4:2:0, MP@HL / MP@ML
MPEG4 4:2:0, MP@4.1 & HP @4.0
Video Bit Rate: MPEG2 1-81 Mbps
Supported Video Formats:
All ATSC formats (A53/E Part 4)
1080i@ 25Hz,
720p@ 50Hz,
576i@ 25Hz
Display Modes:Letterbox, Center-cut, and Anamorphic, or Active Format Descriptor (AFD)
Output Aspect Ratio: 4x3

AUDIO PROCESSING
Number of simultaneous services: 2
Supported Codec:
AC-3 (decode and downmix)
MPEG1 Layers I and II
MPEG2 Layer II
MPEG2 AAC-LC ADTS
MPEG4 AAC-LC ADTS & LOAS
AC-3 Operational Mode: Line Mode, RF Mode,Custom 0, Custom 1
Dynamic Range Control: Enable / Disable
Downmix (selectable): Lo/Ro (Stereo), Lt/Rt (Surround), Dual Mono, Dual Left, Dual Right

OUTPUT SPECIFICATIONS
ASI OUTPUT
Number of ASI Outputs: 1
Standard: EN50083-9 (V2:3/98) DVB-ASI
Data Bit Rate: 270 Mbps
Max TS Rate Supported: 160 Mbps

NTSC COMPOSITE VIDEO OUTPUT
Number of Outputs: 1
Connector: BNC, female
Impedance: 75ohms
Return Loss: >25dB
Frequency Response: DC to 6.0MHz
Amplitude: 140 IRE (1.0Vpp), +/-2 IRE
Display Modes: Letterbox, cropped, anamorphic, or Active Format Descriptor (AFD)
Standard:
ANSI/SMPTE 170M-1994; CCIR656
Format, Frame rate: 525 Lines, 29.97Hz (Interlaced)
Setup (pedestal): On/Off, selectable
VBI Waveforms:
Line 21 CC: EIA-608
XDS V-chip: EIA-608
AMOL: SCTE127
Gemstar (TVGx1, X2): SCTE127

ANALOG AUDIO OUTPUT
Connector: High density 15-pin D-sub, male
Impedance: 600 ohms nominal, 50 ohms min
Output Type: Balanced, 2 channel pairs (+/-, L/R)
Conditions: Load=600ohms, 20dBFS encoded TS source
Amplitude: 24.4 dBu, Adjustable down to 4dBu
Maximum Output: 27dBu
THD+N: <0.01%
Crosstalk: <-85dB
Frequency Response: 20Hz to 20KHz < +/-0.1dBu